vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
Vertical wet pit pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical turbine pump
vertical sump pump
vertical sump pump
vertical sump pump
vertical sump pump
Right Angle Gearboxes
Right Angle Gearboxes
Right Angle Gearboxes

Current Location: HOME /Knowledge /vertical turbine pump

A connection and fixing device for a suspended semi submersible vertical turbine pump

Date:2024/10/21 22:28:52Clicks:

A connection and fixing device for a suspended semi submersible vertical turbine pump


A connection and fixing device for a suspended semi submersible vertical turbine pump, comprising a pump shaft composed of an upper shaft and a lower shaft connected as a whole. The upper end of the pump shaft is installed in a rolling bearing assembly on a bracket, and the lower end of the pump shaft is installed in a bearing of the pump body. A protective pipe and a guide pipe are sequentially fitted from the inside to the outside outside of the pump shaft. The upper and lower shafts are connected by an elastic column pin coupling, and at least one rolling bearing is installed on each of the upper and lower shafts. The protective pipe and the guide pipe are correspondingly connected in sections at the installation of the rolling bearing. This technical method ensures good coaxiality of the pump shaft while reducing the requirements for the machining accuracy and material of the pump shaft. The service life of the relevant rotating parts is beneficial for installation and disassembly.

A connection and fixing device for a suspended semi submersible vertical turbine pump.jpg

Technical requirements: A connection and fixing device for a suspended semi submersible vertical turbine pump, comprising a pump shaft composed of an upper shaft (3) and a lower shaft (4) connected as a whole. The upper end of the pump shaft is installed in a rolling bearing assembly (20) on a bracket (11), and the lower end of the pump shaft is installed in a bearing (22) of the pump body (21). A protective tube (2) and a water guide tube (1) are sequentially installed outside the pump shaft from inside to outside. The feature is that an elastic pin coupling (5) is used to connect the upper shaft (3) and the lower shaft (4), and at least one rolling bearing (6) is installed on each of the upper shaft (3) and the lower shaft (4). The protective tube (2) and the water guide tube (1) are correspondingly connected in a segmented manner at the installation location of the rolling bearing (6).



Scan and add WeChat

TEL:

008618507312158 Xiangyin Industrial Park, Jinlong Town, Xiangyin County, Hunan Province, China susie@hnljpump.com
Copyright 2004-2024 Hunan Perfect Industry Co., ltd  Case Number:湘ICP备2023000934号  China Vertical Turbine Pump Manufacturers